សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ខែសីហា 12, 2025 - 11:17 PM
ដើម្បីកែតម្រូវ Z-position of the frames during installation, follow these steps as outlined in the user guide:
1. Identify Bolt Assemblies to Z-Adjust: Identify the bolt assembly locations that need adjustment away from the wall.
2. Adjust Z-Position of Bolt Assembly:
- Loosen the TEK xxxx .
- Tighten the hollow bolt into the threaded plate until the end of the bolt braces against the brace plate. Continue until the face of the frame is level.
- Tighten the TEK xxxx to lock the Z-position in place.
By following these steps, users can effectively adjust the Z-position of the frames to ensure a level and aligned display installation. Refer to the provided figures in the user guide for visual guidance on the adjustment process.
បន្ថែមមតិយោបល់ថ្មី។