សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ខែសីហា 12, 2025 - 10:27 PM
1. Preparation: Before starting the installation, ensure all parts are included as per the contents diagram on page 1 of the manual. Do not proceed if any part is missing or damaged.
2. Tools Required: You will need a Phillips screwdriver, pliers, wire stripper, safety glasses, electrical tape, and a ladder for the installation process.
3. Safety Precautions: Turn off the main power supply at the circuit breaker panel before beginning the installation to prevent any electrical hazards.
4. សេចក្តីណែនាំអំពីសន្និបាត៖
- Attach the back plate (CC) to the outlet box using the mounting screws provided with the outlet box. Make sure to tighten it securely.
- Strip 3/8" of insulation from the electrical wire ends. Connect the WHITE fixture wire to the WHITE supply wire and the BLACK fixture wire to the BLACK supply wire using wire nuts (BB).
- Connect the fixture ground wire and supply ground wire either using a wire nut or by fastening to the ground xxxx on the mounting bracket. Ensure all wire connections are securely in place inside the outlet box.
- Attach the fixture (A) onto the back plate (CC) using screws (AA) to secure it tightly.
5. Care and Maintenance: Remember to shut off the main power supply before cleaning the product or changing light bulbs. Use a damp ក្រណាត់សម្រាប់សម្អាត និងជៀសវាងការសម្អាតសំណឹក ឬវត្ថុដែលមានជាតិអាល់កុល
By following these steps carefully and referring to the detailed instructions in the manual, you can successfully install the វឌ្ឍនភាពពន្លឺ P350230 4-Light អំពូល LED in your space. If you encounter any difficulties or have further questions, it is recommended to contact a qualified electrician for assistance.
បន្ថែមមតិយោបល់ថ្មី។