សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 12 ខែសីហា ឆ្នាំ 2025 - 03:42 ព្រឹក
ការសម្អាត និងថែទាំរបស់អ្នក។ Labnet VorTemp 56 Shaking Incubator is crucial to ensure its longevity and optimal performance. Here are the recommended cleaning and maintenance guidelines as per the instruction manual:
1. នីតិវិធីសម្អាត៖
- Unplug the unit before cleaning to ensure safety.
- Use warm water or a mild soap solution to clean the surfaces of the unit. Avoid using aggressive or abrasive cleaners as they can damage the finish.
- Wipe up any spilled samples immediately, both inside and outside the chamber.
- Decontaminate the surface of the unit with neutral solutions (pH 7-8).
- The stainless steel platform and nuts can be decontaminated with autoclave (120°C).
2. ព័ត៌មានជំនួយថែទាំ៖
- Clean the chamber regularly to prevent buildup and contamination.
- Ensure all samples are tightly closed before placing them into the unit to avoid spills inside the chamber.
- Be cautious when handling the unit after operation, especially if it has been used at temperatures higher than 60°C, as exposed surfaces can be extremely hot.
- Follow Good Laboratory Practices (GLP) standards when cleaning the inside of the chamber, especially after using hazardous materials.
- Contact the manufacturer before using any cleaning or decontamination methods not specified in the manual.
By following these cleaning and maintenance guidelines, you can ensure the proper functioning and longevity of your Labnet VorTemp 56 Shaking Incubator.
បន្ថែមមតិយោបល់ថ្មី។