សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 11 ខែសីហា ឆ្នាំ 2025 - 12:32 ព្រឹក
នេះបើតាម LEDISONS 480W LED Ultra Flood Light Instruction Manual, if the LEDs stop working, there are several possible causes and solutions:
1. Possible Cause: The power line/plug is not properly connected.
Solution: Reconnect the power cable/plug to ensure a secure connection.
2. Possible Cause: Power failure.
Solution: Check the power source to ensure it is functioning correctly.
3. Possible Cause: Fault with the LED driver.
Solution: Replace the LED driver with a new one.
4. Possible Cause: Damage to the LED chips.
Solution: Replace the LED board containing the damaged LED chips with a new one.
If the LEDs are flashing on and off, the manual suggests the following solutions:
1. Possible Cause: The output of the driver is abnormal.
Solution: Replace the LED driver with a new one.
2. Possible Cause: The LED chip breaks down.
Solution: Replace the LED board containing the faulty LED chip with a new one.
3. Possible Cause: Voltagអស្ថិរភាព។
Solution: Power off the light and check the power supply for any issues.
It is important to follow the troubleshooting steps provided in the manual to ensure the safe and proper functioning of the អំពូល LED ទឹកជំនន់. If the issue persists or if you are unsure about performing any troubleshooting steps, it is recommended to contact authorized staff or the manufacturer for further assistance.
បន្ថែមមតិយោបល់ថ្មី។