សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 09 ខែសីហា ឆ្នាំ 2025 - 12:59 ព្រឹក
To properly attach the សញ្ញាកណ្តាល Digital Vitals Signs Device to the clampអនុវត្តតាមជំហានទាំងនេះ៖
1. Loosen the thumb xxxx : Start by loosening the thumb xxxx on the clamp.
2. Set the xxxx on the clamp: Place the xxxx on the clamp in a position where it is ready to be tightened.
3. ប្រមូលផ្តុំ Clamp and Digital Vitals Signs Device: Slide the Digital Vitals Signs Device onto the clamping platform of the clamp. Ensure that the button on the device snaps into the bottom of the clamp.
4. Secure with set xxxx : Hand-tighten the set xxxx to secure the device in place. If needed, you can further tighten the set xxxx using an Allen wrench for added security.
5. ភ្ជាប់ clamp to the cuff holder pole: Place the clamp onto the cuff holder pole and tighten the thumb xxxx to ensure a stable connection.
By following these steps as outlined in the installation guide, you can securely attach the សញ្ញាកណ្តាល Digital Vitals Signs Device to the clamp for accurate and reliable readings during use.
បន្ថែមមតិយោបល់ថ្មី។