សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 08 ខែសីហា ឆ្នាំ 2025 - 04:04 ព្រឹក
To adjust the altitude setting on the LogiCO2 Grow CO2 Controller, follow these simple steps:
1. Press the push button on the controller until the display shows "Alt."
2. The current altitude setting will be displayed.
3. Press the button to adjust the altitude setting in steps of 200 meters (refer to the altitude adjustment converter table for feet conversion).
4. Adjust the altitude to the closest higher value for your location.
5. To confirm the setting, wait for 10 seconds.
6. The display will return to the normal view after 10 seconds, indicating that the adjustment is complete.
Altitude Adjustment Converter Table:
| Meter | Feet |
|-------|------|
| 0 | 0 |
| 200 | 656 |
| 400 | 1312 |
| ... | ... |
| 5000 | 16404|
ដោយធ្វើតាមជំហានទាំងនេះ អ្នកអាចធានាថារបស់អ្នក។ LogiCO2 Grow CO2 Controller is accurately calibrated for the altitude of your specific location, allowing for precise CO2 concentration measurements in your grow room or greenhouse.
បន្ថែមមតិយោបល់ថ្មី។