សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 07 ខែសីហា ឆ្នាំ 2025 - 05:50 ព្រឹក
To synchronize the WA-100/101 True Diversity Wireless Receiver with a ឧបករណ៍បញ្ជូន, follow these steps based on the transmitter type:
1. Beltpack Transmitter (WA-BP1 or WA-BP2):
- Power up the beltpack transmitter.
- Open the battery compartment of the beltpack transmitter.
- Press the IR-SW button on the Receiver you want to synchronize the beltpack to. The IR LED on the Receiver will flash on/off.
- Face the open side of the beltpack transmitter's battery compartment towards the IR LED on the Receiver.
- The Receiver's IR LED will change from on/off to pulsing, indicating successful communication between the Receiver and the beltpack transmitter.
- Once the Receiver's IR LED turns off, the synchronization is complete. Check the beltpack transmitter's LED display to confirm. You should now have live audio signal in the Receiver.
2. Handheld Microphone Transmitter (WA-HH1 or WA-HH2):
- Power up the handheld microphone transmitter.
- Open the battery compartment of the handheld microphone transmitter.
- Press the IR-SW button on the Receiver you want to synchronize the handheld microphone to. The IR LED on the Receiver will flash on/off.
- Face the IR IN inside the battery compartment of the handheld microphone transmitter towards the IR LED on the Receiver.
- The Receiver's IR LED will change from on/off to pulsing, indicating successful communication between the Receiver and the handheld microphone transmitter.
- Once the Receiver's IR LED turns off, the synchronization is complete. Check the handheld microphone transmitter's LED display to confirm. You should now have live audio signal in the Receiver.
3. Podium Microphone Transmitter (WA-PM1 or WA-PM2):
- Power up the podium microphone ឧបករណ៍បញ្ជូន.
- Press the IR-SW button on the Receiver you want to synchronize the podium microphone to. The IR LED on the Receiver will flash on/off.
- Face the IR RX LED of the podium microphone transmitter towards the IR LED on the Receiver.
- The Receiver's IR LED will change from on/off to pulsing, indicating successful communication between the Receiver and the podium microphone transmitter.
- Once the Receiver's IR LED turns off, the synchronization is complete. Check the podium microphone transmitter's LED display to confirm. You should now have live audio signal in the Receiver.
By following these steps, you should be able to successfully synchronize your WA-100/101 True Diversity Wireless Receiver with the corresponding transmitter for seamless audio transmission.
បន្ថែមមតិយោបល់ថ្មី។