សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 07 ខែសីហា ឆ្នាំ 2025 - 04:38 ព្រឹក
To test the safety valve in the SMB shut off valve with filter, ensure that the red diode on the valve is illuminated, indicating that the valve is powered on and open. Press the red test button on the SMB connection box to test the opening and closing of the valve. The red diode on the valve should turn off, and you should hear a distinct clicking sound.
Before testing the valve, manually turn off the flow of CO2 by closing the emergency shut off valve and ensure there is no gas pressure in the system. This step is crucial before opening the system to clean the filter. The filter is designed to catch any debris.
ដើម្បីសម្អាតតម្រង៖
1. Use a socket wrench to carefully remove the filter from the valve.
2. Clean the filter thoroughly to remove any debris.
3. Ensure the filter gasket is in place.
4. Reinstall the filter securely.
5. Open the emergency shut off valve to allow the flow of CO2 again.
Regular maintenance and cleaning of the filter are essential to ensure the proper functioning of the SMB shut off valve with filter.
បន្ថែមមតិយោបល់ថ្មី។