សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 07 ខែសីហា ឆ្នាំ 2025 - 03:47 ព្រឹក
To perform a quantitative analysis of sample data using the Quant application in Insight Pro, follow these steps as outlined in the ការណែនាំអ្នកប្រើប្រាស់:
1. Start Insight Pro Software: Turn on the computer, install the Insight Pro software, connect the instrument to the computer via a USB cable, and launch the software by double-clicking the Insight Pro desktop icon.
2. Select Quant Application: On the Insight Pro window, click on the Quant button in the Classic view. This will open the setting page for the Quant application.
3. Set Parameters: Set the desired parameters for the quantitative analysis experiment. This may include specifying the wavelengths, calibration settings, and any other relevant parameters.
4. Follow Instructions: Click and follow the instructions that appear on the screen. This may involve providing information about the samples or standards being used for the analysis.
5. Acquire Data: Install the sample or standard as instructed and proceed with acquiring the data by following the on-screen prompts. The acquired data will be displayed for analysis.
6. Generate Report: To create a report of the quantitative analysis results, click on the report icon. Specify the measurement results to include, design the layout of the report, and select the sample data to be included in the report.
7. Save Data: To store the quantitative analysis data for future reference, click on the data storage icon from the Bottom Ribbon of the Insight Pro window. Double-click on the desired experiment from the list to open and view the saved data.
By following these steps, users can effectively perform quantitative analyses of sample data using the Quant application in Insight Pro with the Thermo SCIENTIFIC Evolution Pro Spectrophotometer.
បន្ថែមមតិយោបល់ថ្មី។