សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ខែសីហា 06, 2025 - 11:22 PM
នេះបើយោងតាមការណែនាំអ្នកប្រើប្រាស់ AccuBANKER D585 Multi Scanix Counterfeit Detector, cleaning the sensors is an essential maintenance task to prevent issues with bill verification. Here is the recommended procedure for cleaning the sensors:
1. Cleaning of Optical Sensors:
- Periodically clean the optical sensors to prevent paper particles or dust from adhering to them.
- Use a soft brush to remove debris and dust from inside the unit.
- Use compressed air to remove dust from the inside.
- Use an alcohol swab (Cleaning Swabs) to remove dust particles adhering to the magnetic heads.
2. Internal Cleaning of the Unit:
- Turn off and unplug the machine before proceeding with cleaning.
- Open the top cover of the unit to access the optical and magnetic sensors.
- Use a soft brush to help remove debris and dust from inside the unit.
- Use compressed air to remove dust from the inside.
- Use an alcohol swab to remove dust particles adhering to the magnetic heads.
3. អនុសាសន៍បន្ថែម៖
- Ensure the equipment is in a clean, dust-free environment to maintain optimal sensor performance.
By following these cleaning guidelines, you can ensure that the sensors of your AccuBANKER D585 Multi Scanix Counterfeit Detector remain free from debris and dust, allowing for accurate bill verification.
បន្ថែមមតិយោបល់ថ្មី។