សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ខែសីហា 06, 2025 - 10:44 PM
To restore the factory settings of the Homematic HMIP-PS Pluggable Switchអនុវត្តតាមជំហានទាំងនេះ ដូចដែលបានគូសបញ្ជាក់នៅក្នុង សៀវភៅណែនាំអ្នកប្រើប្រាស់:
1. Unplug the device from the socket.
2. Plug in the device into the socket again while pressing and holding down the system button (A) for 4 seconds at the same time, until the LED will quickly start flashing orange.
3. Release the system button again.
4. Press and hold down the system button again for 4 seconds, until the status LED lights up green.
5. លែងប៊ូតុងប្រព័ន្ធ ដើម្បីបញ្ចប់នីតិវិធី។
After following these steps, the device will perform a restart and be reset to its factory settings.
បន្ថែមមតិយោបល់ថ្មី។