សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 06 ខែសីហា ឆ្នាំ 2025 - 03:25 ព្រឹក
To switch between the different working modes of the EE-LD-SFL-5W Solar LED Flood Light, you need to follow these steps:
1. Sensor Mode: This mode is activated by default. When the battery capacity is above 30%, the light will automatically turn on to full brightness when motion is detected within a range of up to 6 meters. After 20 seconds of no motion, the light will dim to weak brightness. If the battery capacity drops below 30%, the light will turn off after 20 seconds of no motion.
2. Constant Lighting Mode: To switch to Constant Lighting Mode, press the button for 3 seconds until the lamp shines once. In this mode, both the motion and light sensors are disabled, and the light will remain constantly lit until the battery capacity reaches zero, at which point it will switch back to Sensor Mode.
By understanding these two modes and how to switch between them, users can customize the lighting function of the EE-LD-SFL-5W Solar LED Flood Light based on their specific needs and preferences.
បន្ថែមមតិយោបល់ថ្មី។