សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ខែសីហា 03, 2025 - 10:20 PM
To pair your iOS device with the iN-Command systemសូមអនុវត្តតាមជំហានទាំងនេះ ដូចដែលបានរៀបរាប់នៅក្នុងសៀវភៅណែនាំអ្នកប្រើប្រាស់៖
1. Enable "Bluetooth" in the system settings of your iOS device.
2. Press and hold the "Bluetooth pairing" button on the Switch Plate (NCSP60SP) for 5 seconds to enter discovery mode. The blue LED will start to flash.
3. The Switch Plate (NCSP60SP) will be displayed on the mobile device list in the format NCSP60XXXXX. Select the Switch Plate on your mobile device to pair with it.
4. Once paired, your mobile device will show that the Switch Plate is connected, and the blue LED on the Switch Plate will stop flashing.
Following these steps should successfully pair your iOS device with the iN-Command system. If you encounter any issues during the pairing process, refer to the manual for troubleshooting steps or contact ASA Electronics Technical Support for assistance.
បន្ថែមមតិយោបល់ថ្មី។