សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ខែសីហា 03, 2025 - 09:46 PM
To properly light the propane fire pit tableអនុវត្តតាមជំហានទាំងនេះ ដូចដែលបានគូសបញ្ជាក់នៅក្នុង សៀវភៅណែនាំអ្នកប្រើប្រាស់:
1. Make sure the control xxxx is in the "OFF" position.
2. Slowly open the valve on the propane gas tank by turning the xxxx counterclockwise.
3. Push and hold the electronic igniter to create sparks within the electrode, continue to hold.
4. Push in the control xxxx and turn to the "low" position. Keep holding the control xxxx to allow gas to flow for 45 seconds.
5. If ignition doesn't occur within a few seconds, release the control xxxx and rotate to the "OFF" position. Wait for 5 minutes for gas to clear and then repeat the above lighting instructions.
6. To adjust the flame, turn the control xxxx either clockwise or counterclockwise depending on whether you want to lower or raise the flame.
Remember to always follow the safety precautions mentioned in the manual, such as ensuring the area is well-ventilated, keeping flammable items away, and supervising the unit while in use. If you encounter any issues with lighting the fire pit table, refer to the troubleshooting section in the manual for possible solutions.
បន្ថែមមតិយោបល់ថ្មី។