សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 02 ខែសីហា ឆ្នាំ 2025 - 05:56 ព្រឹក
If the LED chips in your Lowe's KXR3001LX-03 LED Flushmount Ceiling Fixture do not light up, the most common causes could be a faulty wire connection or a faulty switch. Here's how you can troubleshoot and address these issues based on the provided manual:
1. មូលហេតុដែលអាចកើតមាន៖ ការភ្ជាប់ខ្សែខុស។
Corrective Action: Check the wiring connections. Ensure that the black wire is connected to the black wire, the white wire to the white wire, and the ground/bare wire to the ground/bare wire. Use pliers to twist the stripped wire ends together securely.
2. Possible Cause: Faulty switch.
Corrective Action: Test the switch to see if it is functioning properly. If the switch is found to be faulty, consider replacing it with a new switch.
By following these troubleshooting steps, you should be able to identify and address the issue causing the LED chips not to light up in your Lowe's KXR3001LX-03 LED Flushmount Ceiling Fixture. If the problem persists after checking the wiring and the switch, you may need to contact Lowe's customer service for further assistance.
បន្ថែមមតិយោបល់ថ្មី។