សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 02 ខែសីហា ឆ្នាំ 2025 - 12:21 ព្រឹក
1. Carefully remove the fixture from the packaging and ensure all parts are included.
2. Shut off power at the circuit breaker and remove the old fixture and mounting hardware.
3. Determine the desired hanging height for the ចង្កៀងចង្កៀង.
4. Thread the rods (11, 12, 13) to the xxxx of the fixture body (M) and attach the loop (K) by screwing it into rod (11).
5. Attach the quick link (J) to the loop (K) on the canopy (H) and feed the wire over the loop and canopy.
6. Attach the mounting bracket (B) to the junction box (E) using the provided mounting screws (size: 8/32 * 25mm). Ensure the side marked "GND" faces out and tighten the screws securely.
7. Use the support cable provided to support the weight of the fixture while wiring. Align the fixture with the mounting bracket and attach the hook (M) of the support cable into a slot on the mounting bracket.
8. Connect the electrical wires as shown in the manual (Fig. 2) and ensure all wire connections are secure. Connect the fixture's Ground Wire to the ground wire in the outlet or to the circular strap using the Green xxxx if no ground wire is present.
9. Position the canopy (H) so that the mounting screws line up with the holes in the canopy and secure it in place with the provided mounting screws (G).
10. គ្របដណ្តប់ទាំងអស់លីត្រampអ្នកកាន់គម្របទៀន (N) ។
11. Install the light bulbs according to the fixture's specifications, ensuring not to exceed the maximum wattagចំណាត់ថ្នាក់អ៊ី។
12. Once everything is securely attached and wired, finish the installation by testing the fixture.
Always refer to the specific instructions provided in the manual for the ឡូវ 4676-111 8-Light Dark Bronze with Mosaic Gold Inte Modern-Contemporary ចង្កៀង for accurate installation steps.
បន្ថែមមតិយោបល់ថ្មី។