សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 29 ខែកក្កដា ឆ្នាំ 2025 - ម៉ោង 10:51 យប់
ដើម្បីចាប់ផ្តើម ANOVA GC900 Generator safely and correctly, follow these steps as outlined in the user manual:
1. Pre-operation verification:
- Ensure the fuel tank capacity is 4L.
- Use gasoline mixed with oil (Gasoline Oil Mix Ratio 50:1).
- Do not fill above the top of the fuel filter.
- Shake the fuel tank before starting.
2. ការចាប់ផ្តើមម៉ាស៊ីន៖
- Turn the fuel lever to "ON."
- Turn the choke lever to "1."
- Turn the engine switch to "ON."
- Pull the recoil starter slowly until you feel slight tension, then pull vigorously.
- Open the choke again.
3. ឧបករណ៍សុវត្ថិភាព៖
- Press to reset the AC or DC protector.
- Reduce the load within the rated output if the protector is turned off.
4. ជួរនៃកម្មវិធី៖
- Follow the guidelines for different power factors and frequencies provided in the manual.
5. បញ្ឈប់ម៉ាស៊ីន៖
- Before stopping, turn off all electrical appliances.
- Turn the engine switch to "stop."
- Turn the fuel lever to the "OFF" position.
6. ការតភ្ជាប់៖
- Wind the cord 2-3 turns around the handle.
- Start the engine.
- Connect it to the AC outlet.
7. Battery charger (if equipped):
- Connect the red wire to the positive pole (+) and black to the negative pole (-).
By following these steps, you can safely and correctly start your ANOVA GC900 Generator. Always refer to the សៀវភៅណែនាំអ្នកប្រើប្រាស់ សម្រាប់ការណែនាំលម្អិត និងការប្រុងប្រយ័ត្នសុវត្ថិភាព។
បន្ថែមមតិយោបល់ថ្មី។