សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 29 ខែកក្កដា ឆ្នាំ 2025 - ម៉ោង 09:23 យប់
To access the management interface of the AVCOMM 610FX2 Managed Ethernet Switchអ្នកអាចអនុវត្តតាមជំហានទាំងនេះ៖
1. Web ការគ្រប់គ្រង៖
- Ensure the device is properly connected to the network.
- បើក ក web កម្មវិធីរុករកតាមអ៊ីនធឺណិត (Google Chrome, Internet Explorer, Mozilla Firefox) ។
- Type the default IP address http://192.168.1.254 នៅក្នុងរបារអាសយដ្ឋាន។
- Enter the default username and password (admin) in the login screen.
- You will be prompted to change your password on first login.
- Once logged in, you can configure the device settings through the web- ចំណុចប្រទាក់ការគ្រប់គ្រងផ្អែកលើ។
2. Console Management (using RS232 Port):
- Connect a console cable between your PC and the device.
- Use a terminal emulation software like SecureCRT.
- Configure the serial settings: Baud Rate: 115200, Parity: None, Data Bit: 8, Stop Bit: 1, Control of flow: None.
- Enter the default username and password (admin) to login.
- Follow the User Manual to configure the software features.
3. Telnet Management:
- Open Command Prompt on your PC.
- Type the default username and password (admin) for Telnet access.
- Enter the managed IP address of the Ethernet port connected to the PC.
- Follow the prompts to configure the device via Telnet.
4. SSH (Secure Shell):
- The device supports SSH for secure remote access.
- Download an SSH client tool from the internet.
- Connect to the switch using SSH to access the command line interface securely.
Please ensure you refer to the សៀវភៅណែនាំអ្នកប្រើប្រាស់ for detailed instructions on configuring specific features and settings through the management interfaces. If you encounter any issues during the setup or configuration process, you can contact AVCOMM support by submitting an online service form or emailing sales@avcomm.cn for assistance.
បន្ថែមមតិយោបល់ថ្មី។