សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 28 ខែកក្កដា ឆ្នាំ 2025 - ម៉ោង 11:16 យប់
ដើម្បីភ្ជាប់ និងកំណត់រចនាសម្ព័ន្ធ LANCOM XS-5116QF switch for initial setup, follow these steps based on the user guide:
1. Configuration Interfaces: Connect the configuration interface (RJ-45 or micro USB) to a device for configuration/monitoring. Use the included serial configuration cable or a suitable micro USB cable.
2. USB Interface: Connect a USB stick to store configuration scripts or upload new firmware.
3. SFP+ Interfaces: Insert LANCOM SFP modules into the SFP+ interfaces 1 to 12. Use compatible cables and follow mounting instructions.
4. Combo Ports: Connect Ethernet cables to interfaces 13 to 14 for PC or LAN switch connection.
5. QSFP+ Interfaces: Plug LANCOM QSFP+ modules into interfaces 15 to 16 with suitable cables.
6. Power Supply: Use the power supply module with mains connection socket. Ensure the mains plug is accessible, avoid stacking devices on top, and keep ventilation slots clear.
7. Installation: Mount the switch in a 19” slot of a server rack using the provided rack mounting system.
8. Startup: Before initial startup, refer to the installation guide. Operate the device with a professionally installed power supply.
9. Specifications: Check LED indicators for system status, fan status, stack connection, and port activity. Use the reset button for device restart or configuration reset.
10. Hardware: Note power supply details, power consumption, temperature range, housing, and number of fans.
11. Interfaces: Understand the QSFP+, SFP+/TP-Ethernet combo ports, SFP+ downlink ports, console, and USB interfaces.
12. Package Content: Ensure all mounting materials, power supply, and cables are included in the package.
ដោយអនុវត្តតាមជំហានទាំងនេះ និងការណែនាំពី ស LANCOM XS-5116QF user guide, you can successfully connect and configure the switch for initial setup.
បន្ថែមមតិយោបល់ថ្មី។