ចម្លើយ

ថ្ងៃទី 28 ខែកក្កដា ឆ្នាំ 2025 - ម៉ោង 01:50 ព្រឹក
1. នេះ។ transmission jack is delivered disassembled and must be assembled before using it for the first time. Check the supplied parts before assembling. Ensure that there is no transport damage and no parts are missing.
2. Attach the four wheels to the two feet using the supplied materials. Ensure that the wheels are securely attached.
3. Attach the two feet to the underside of the base with the Allen bolts and washers without tightening the screws initially. Before tightening the screws, ensure that the piston rod is completely vertical. This is crucial for the stability and safety of the gearbox jack.
4. Attach the retainer to the end of the piston rod. Loosen the xxxx on the oil filler opening to allow air to escape. Raise the gearbox jack without any load. Do not press the foot pedal while tightening the xxxx as it can damage the hydraulic pump. After lowering the gearbox jack, it is now ready for use.
5. **Important:** Always observe the specified load capacity when using the gearbox jack.
6. The gearbox jack is designed for transporting loads over short distances and should only be moved when the support is in the lowest position, with the piston rod fully retracted. Ensure that the load being carried is secured and cannot fall to the ground.
7. Do not overload the device as overloading can lead to serious damage to the gearbox jack, property damage, and personal injury.
8. Use special positioners for moving other components such as rear axles.
9. Before carrying out repairs, ensure that the vehicle is securely supported and cannot tip over from the lifting platform when the gearbox is removed.
** គន្លឹះបន្ថែម៖ **
- Always ensure that the load is centered on the gearbox jack to prevent tipping or damage.
- Use the gearbox jack on a level floor that can withstand the lifted load to avoid vibrations and potential accidents.
- Failure to follow assembly instructions and safety guidelines could result in property damage and personal injury.
យោងទៅ XPOtool 50795 Hydraulic Gearbox Jack user manual សម្រាប់ការណែនាំលម្អិត និងការប្រុងប្រយ័ត្នសុវត្ថិភាព។
បន្ថែមមតិយោបល់ថ្មី។