សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 26 ខែកក្កដា ឆ្នាំ 2025 - ម៉ោង 11:55 ព្រឹក
នេះបើយោងតាមសៀវភៅដៃអ្នកប្រើដែលបានផ្តល់ឱ្យសម្រាប់ កញ្ចប់ AVKIN Avline v7 Elite Simulation, here are the steps for cleaning and maintaining the simulator:
1. **ការថែទាំ និងថែទាំ៖**
- Remove any marks, moulage, or blood on the silicone chest.
- Flush distilled water into each port to clean out the central line and port-a-cath, followed by flushing with air.
2. **Removal of Port-a-cath for Cleaning:**
- Clamp the white clamp on the tubing from the blood bag to the port-a-cath.
- Disconnect the electrical and tubing connections.
- Remove the port-a-cath from the device by sliding out the port-a-cath housing.
- Pull out the silicone insert from the port-a-cath and wipe down both the plastic and silicone components with a paper towel. Snap the silicone back into place when complete.
- Connect the barb on the port-a-cath to the port-a-cath tubing. Connect the tubing from the blood bag to the port-a-cath tubing. Release the white clip.
- Make sure the port-a-cath housing is pushed into the device and clamped ចុះ។
- Attach the electrical connection to the port-a-cath housing.
3. **Replace Port-a-cath Skin:**
- If the port-a-cath skin needs to be replaced, twist out (counter-clockwise) the current replacement skin.
- To twist in the new replacement skin (clockwise), coat the replacement skin and chest plate with mineral oil.
By following these cleaning and maintenance procedures outlined in the user manual, you can ensure that your កញ្ចប់ AVKIN Avline v7 Elite Simulation remains in good condition and provides effective training simulations for standardized patients.
បន្ថែមមតិយោបល់ថ្មី។