សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 26 ខែកក្កដា ឆ្នាំ 2025 - ម៉ោង 10:14 ព្រឹក
To set up multiple systems with the ប្រព័ន្ធមីក្រូឥតខ្សែពីរ SHURE BLX288អនុវត្តតាមជំហានទាំងនេះ៖
1. **Prepare for Setup:**
- Turn off all transmitters and turn on any equipment that could cause interference during the performance.
2. **Set Up the First Receiver:**
- Press and release the group button on the first receiver to perform a group scan and find the clearest group and channel.
- Turn on the first transmitter and change the group and channel to match the receiver. Leave the transmitter on.
3. **Set Up Additional Receivers:**
- For each additional receiver, manually change the group to match the first receiver.
- Turn on the transmitter for each additional receiver and change the group and channel to match the respective receiver.
- Leave each transmitter on and continue to the next system.
4. **Perform Audio Check:**
- Once all receivers are set up, perform an audio check on all microphones to ensure proper functionality.
5. **ការដោះស្រាយបញ្ហា៖**
- If you encounter interference or dropouts, try changing receiver channels, repositioning the receiver for better line of sight, removing sources of interference, and keeping transmitters and receivers at recommended distances.
By following these steps, you can successfully set up and synchronize multiple systems with the ប្រព័ន្ធមីក្រូឥតខ្សែពីរ SHURE BLX288 for a seamless performance.
បន្ថែមមតិយោបល់ថ្មី។