សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 25 ខែកក្កដា ឆ្នាំ 2025 - ម៉ោង 03:58 ព្រឹក
ដើម្បីភ្ជាប់របស់អ្នក។ ឧបករណ៍បញ្ជាពន្លឺឆ្លាតវៃ MOES MS-104B to your Wi-Fi network, follow these steps as outlined in the manual:
1. Make sure your smartphone is close to the switch module and that you have a minimum of 50% Wi-Fi signal.
2. Complete the wiring of the switch module before pairing.
3. There are two pairing methods:
- **Method one (New Updated):**
- Ensure your phone is connected to both Wi-Fi and Bluetooth.
- Open the Smart Life/Tuya App and click on the "+" icon.
- Select the device you want to add and enter your Wi-Fi password.
- Wait for the connection to complete.
- **Method two (Traditional pairing method):**
- After wiring the switch module, press the traditional switch to enter pairing mode.
- For reset switch: press the switch button for 10 times until you hear continuous beeping.
- For rocker light switch: press the switch button for 20 times (ON/OFF cycle for 10 times) until continuous beeping.
- For switch module: long press the reset button on the module until you hear specific beeping patterns.
4. Open the App, select "+" and choose "Switch (Wi-Fi)" to add the device.
5. Ensure your smartphone and the switch module are on the same 2.4GHz Wi-Fi network.
6. Confirm the rapid blinking of the light on the switch module.
7. The connection process may take 10-120 seconds depending on your network.
8. Once pairing is successful, the switch will be shown on the App.
If you encounter issues during the pairing process, ensure that your phone and the switch module are on the same Wi-Fi network, and follow the pairing instructions carefully. If problems persist, refer to the troubleshooting section in the manual or contact ម។ ស ការគាំទ្រអតិថិជនសម្រាប់ជំនួយ។
បន្ថែមមតិយោបល់ថ្មី។