សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 26 ខែមិថុនា ឆ្នាំ 2025 - ម៉ោង 05:46 ព្រឹក
To install custom panels on the MONOGRAM ZIC360NNRH refrigerator, you will need to follow the guidelines provided in the instruction manual. Here are the steps:
1. **Panel Types:** The refrigerator supports both 1/4" framed panels and 3/4" overlay panels for customization.
2. **Panel Weight Limits:** Ensure that the total weight of the custom panels does not exceed the specified limits for each type of panel (Fresh food door panel – 58 lbs, Freezer drawer panel – 28 lbs, Grille panel – 11 lbs).
3. **Panel Installation:**
- For 1/4" framed panels: The decorative panels slide into the trim.
- For 3/4" overlay panels: The overlay panel must be secured to a 1/4"-thick backer panel which slides into the trim. A spacer panel 0.10" thick must be placed between the overlay and backer panels. Center each panel over the other. Assemble the panels with glue and screws.
4. **Door Handles:** Custom handles supplied by your cabinet maker may be used. Optional visor handle kit ZKLN is available for purchase.
5. **Side Panels:** If the sides of the refrigerator will be exposed, side panels must be used. Order the side panels from the cabinet manufacturer.
6. **Dual Installations:** For side-by-side installations, additional considerations and clearances are required. Ensure that there is 1" clearance between the units in a side-by-side installation.
7. **Unification Kit:** Order ZKBFN720NII unification kit for an integrated appearance on 2 custom panel models installed side-by-side.
By following these instructions and guidelines from the manual, you can successfully install custom panels on your MONOGRAM ZIC360NNRH refrigerator to personalize its appearance.
បន្ថែមមតិយោបល់ថ្មី។