សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 13 ខែមិថុនា ឆ្នាំ 2025 - ម៉ោង 04:28 ព្រឹក
To program the priority channels on the Regency ACT-T-720A Digital Flight Scan receiverអនុវត្តតាមជំហានទាំងនេះ៖
1. **Enter Channel 1 Priority:**
- Touch "PRIORITY" on the panel. The display will show "Prior."
- Touch the CHANNEL NUMBER 1. If in MANUAL mode, "Prior" will disappear, and the channel frequency followed by a "P" will be displayed. If in SCAN mode, the channel will jump to the next channel and resume scanning.
2. **Remove Channel 1 Priority:**
- Touch "PRIORITY." "Prior" will appear on the display.
- Touch CHANNEL NUMBER 1. In MANUAL mode, "Prior" will disappear, and the channel frequency without "P" will be displayed. In SCAN mode, the channel will jump to the next channel and resume scanning.
3. **Enter Second Priority (Channel 2 through 16):**
- The second "PRIORITY" can be entered into any channel except Channel 1.
- Touch "PRIORITY." "Prior" will appear on the display.
- Touch the CHANNEL NUMBER of the desired channel. If in MANUAL mode, "Prior" will disappear, and the channel frequency followed by a "P" will be displayed. If in SCAN mode, the channel will jump to the next channel and resume scanning.
By following these steps, you can easily program the priority channels on the Regency ACT-T-720A Digital Flight Scan receiver as per the user manual instructions.
បន្ថែមមតិយោបល់ថ្មី។