សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 13 ខែមិថុនា ឆ្នាំ 2025 - ម៉ោង 12:38 ព្រឹក
To configure the Device Connector settings on your Cisco APIC platform for Cisco Intersight Nexus Dashboard Baseអនុវត្តតាមជំហានទាំងនេះ៖
1. **Access Device Connector Settings:**
- In the Cisco APIC GUI, navigate to **System > System Settings > Intersight**.
2. **Check Device Connector Status:**
- Check the status of the Device Connector:
- If you see green dotted lines connecting Internet to Intersight and the text "Claimed," the Device Connector is already configured and connected.
- If you see yellow dotted lines and "Not Claimed," the Device Connector needs configuration.
- If you see red dotted lines, the proxy may be configured incorrectly.
3. **Update Device Connector Software (Optional):**
- If there is a new software version available and you want to update, click on the provided links to update immediately or enable auto-update.
4. **Configure General Settings:**
- Click on the **Settings** link next to the Device Connector heading.
- In the General page, configure:
- Device Connector: Enable for communication with Intersight.
- Access Mode: Choose between Read-only or Allow Control.
- Auto Update: Toggle ON for automatic software updates.
5. **Save General Settings:**
- Click **Save** after configuring the General settings.
6. **Configure Proxy Settings (if required):**
- Click on **Settings** and then **Proxy Configuration**.
- Configure the proxy settings:
- Enable Proxy, enter Proxy Hostname/IP, Proxy Port.
- If authentication is required, enable and enter Proxy Username and Password.
- Click **Save** after configuring the Proxy settings.
7. **Manage Certificates (if needed):**
- If certificate management is required, click on **Settings** and then **Certificate Manager**.
- Import CA signed certificates in the *.pem format.
- View, delete, or manage certificates as needed.
- Click **Close** after completing certificate management.
8. **Verify Configuration:**
- Ensure the Device Connector is connected and claimed in the Intersight service.
- Check the status and connection details to confirm successful configuration.
By following these steps, you can properly configure the Device Connector settings on your Cisco APIC platform to connect to Cisco Intersight Nexus Dashboard Base.
បន្ថែមមតិយោបល់ថ្មី។