សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 11 ខែមិថុនា ឆ្នាំ 2025 - ម៉ោង 01:21 ព្រឹក
យោងតាមសៀវភៅណែនាំអ្នកប្រើប្រាស់ NEO NAS TH02 ឧបករណ៍ចាប់សញ្ញាសីតុណ្ហភាព និងសំណើម can be reset by following these steps:
1. Locate the reset button on the sensor. The reset button is usually a small indentation that may require a pin or paperclip to press.
2. Press and hold the reset button for a few seconds until the LED indicator on the sensor blinks or changes color, indicating that the reset process has been initiated.
3. Release the reset button after the LED indicator reacts, and the sensor will reset to its default settings.
4. Once the sensor has been successfully reset, you can proceed with reconfiguring it according to the user manual instructions.
It is recommended to reset the device before attempting any new configuration to ensure a fresh start and proper functionality.
បន្ថែមមតិយោបល់ថ្មី។