សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ឧសភា 23, 2025 - 10:58 AM
To change the LED lighting modes on the ក្ដារចុចមេកានិក TECWARE PHANTOM RGBអនុវត្តតាមជំហានទាំងនេះ៖
1. **Selecting LED Lighting Modes:**
- Press and hold the "Fn" key.
- Press the corresponding Mode Key to cycle through different lighting modes. For example, "Fn + F1" for Lighting Mode 1, "Fn + F2" for Lighting Mode 2, and so on.
- Each mode offers different lighting effects such as Breathing, Reactive, Waves, and more.
2. **Adjusting Brightness and Speed:**
- To increase or decrease the brightness of the LED lighting, use the "Fn + Page Up" (Brightness Increase) and "Fn + Page Down" (Brightness Decrease) keys.
- To adjust the speed of the LED lighting effects, use the "Fn + Left Arrow" (LED Lighting Speed Decrease) and "Fn + Right Arrow" (LED Lighting Speed Increase) keys.
3. **Spectrum Selection Mode (LED Palette):**
- Press "Fn + =" key to activate the Spectrum Selection Mode. This mode turns your keyboard into a color palette where each key represents a different color.
- Press on the key corresponding to your desired color. Press "=" key for Rainbow color.
4. **Additional Customization:**
- For more advanced customization options, you can download the software from www.tecware.co. Please note that the software is compatible with Windows operating systems only.
By following these steps, you can easily switch between different LED lighting modes, adjust brightness and speed, and even create a personalized color palette on your ក្ដារចុចមេកានិក TECWARE PHANTOM RGB.
បន្ថែមមតិយោបល់ថ្មី។