សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ឧសភា 15, 2025 - 01:04 AM
To configure the alarm settings for the sensors on the SmartGen AIN16-M01 ម៉ូឌុលរួមបញ្ចូលអាណាឡូកសូមអនុវត្តតាមជំហានទាំងនេះ ដូចដែលបានរៀបរាប់នៅក្នុងសៀវភៅណែនាំអ្នកប្រើប្រាស់៖
1. **Parameter Configuration List:**
- The parameters related to sensor alarms can be set via the HMC9000 controller or HMC9000 PC software. The following parameters can be configured:
- Module Enable
- Sensor types
- Sensor Curve
- Alarm Speed
- Range
- High Shutdown Enable
- High Shutdown Value
- High Shutdown Delay
- Low Shutdown Enable
- Low Shutdown Value
- Low Shutdown Delay
- High Warn Enable
- High Warn Value
- High Return Value
- High Warn Delay
- Low Warn Enable
- Low Warn Value
- Low Return Value
- Low Warn Delay
- User-defined string
2. **PTIN1~PTIN8 AND CIN1 SETTINGS:**
- These settings are specific to the sensor types and their corresponding alarm configurations. You can set parameters such as sensor types, alarm speed, range, high/low shutdown values, delays, and more for each sensor individually.
3. **MP1~MP3 SETTINGS:**
- These settings are related to speed sensors. You can configure parameters like sensor enable/disable, teeth number, high shutdown values, delays, and warnings.
4. **AOUT1~AOUT4 SETTINGS:**
- These settings are for configuring the analog output based on the selected sensor data. The HMC9000 controller transfers data to the related 4~20mA output port of the AIN16-M01 module via CANBUS.
5. **ការតភ្ជាប់អគ្គិសនី៖**
- Ensure proper electrical connections as per the provided diagram in the user manual to avoid any communication or power-related issues.
By following the steps outlined in the manual and configuring the alarm settings as per your requirements, you can effectively monitor and manage sensor data on the SmartGen AIN16-M01 ម៉ូឌុលរួមបញ្ចូលអាណាឡូក.
បន្ថែមមតិយោបល់ថ្មី។