សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ឧសភា 10, 2025 - 02:35 AM
To program the temperature settings on the INTIEL TD-3.1.1 ទែម៉ូស្តាតឌីផេរ៉ង់ស្យែលដែលអាចសរសេរកម្មវិធីបាន។សូមអនុវត្តតាមជំហានទាំងនេះដោយផ្អែកលើសៀវភៅណែនាំអ្នកប្រើប្រាស់៖
1. **Enter Programming Mode:** After connecting the thermostat to the power supply, it will automatically display the water heater temperature. Press the "PROGRAM" button to enter the programming mode.
2. **Inspect Temperatures:** Use the "SELECT" button to switch between displaying the water heater temperature (Tb) and the solar panel temperature (Tp).
3. **Adjust Temperature Settings:**
- Press the "PROGRAM" button to display the first temperature setting, which is ∆Т (temperature difference between the solar panel and water heater).
- The displayed temperature will blink for 10 seconds. Use the "SELECT" button to adjust the temperature within the specified range.
- Press the "PROGRAM" button again to save the adjusted temperature. Repeat this process for each temperature setting (Wb, Tbmax, Tpmin, Tpmax, Tpdefrost, H).
4. **Quick Value Change:** To quickly change a selected value, hold down the "SELECT" button.
5. **Exit Programming Mode:** After adjusting all temperature settings, the thermostat will return to the start mode, and the new values will be saved as the current settings.
6. **Emergency Alerts:** The thermostat will indicate alarms if certain temperature thresholds are exceeded, such as Tbmax, Tpmax, or Tpdefrost. Pay attention to these alerts for system safety.
By following these steps, you can successfully program the temperature settings on the INTIEL TD-3.1.1 ទែម៉ូស្តាតឌីផេរ៉ង់ស្យែលដែលអាចសរសេរកម្មវិធីបាន។ តាមការណែនាំរបស់អ្នកប្រើ។
បន្ថែមមតិយោបល់ថ្មី។