សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 05 ខែឧសភា ឆ្នាំ 2025 - ម៉ោង 12:39 យប់
ដើម្បីដំឡើងនិងដំឡើងបានត្រឹមត្រូវ DS18 PRO-X8.4BM Midrange Loudspeakerអនុវត្តតាមជំហានទាំងនេះ៖
1. Determine the mounting location: Choose a suitable location in your vehicle or audio setup where the speaker will fit and provide optimal sound performance.
2. Prepare the mounting surface: Ensure the mounting surface is clean and free of any debris that could affect the speaker's performance.
3. Mounting the speaker: Use the provided dimensions to cut out the front mount baffle cutout, ensuring it matches the specified size of 182 mm (7.17 inches). The overall diameter of the speaker is 209 mm (8.22 inches).
4. Mounting depth: The speaker has a mounting depth of 79 mm (3.11 inches). Make sure there is enough space behind the mounting surface to accommodate the speaker's depth.
5. Wiring: Connect the speaker's terminals to your audio system, ensuring the correct polarity to avoid phase cancellation.
6. Power handling: The DS18 PRO-X8.4BM has a maximum power handling of 500 watts and an RMS power handling of 275 watts. Ensure your audio system is compatible with these power ratings to prevent damage to the speaker.
7. Crossover settings: The recommended high-pass crossover for this speaker is 120 Hz. Set your audio system's crossover accordingly to ensure the speaker receives the appropriate frequency range.
By following these installation steps and guidelines provided in the owner's manual, you can properly install and mount the DS18 PRO-X8.4BM Midrange Loudspeaker for optimal performance in your vehicle or audio setup.
បន្ថែមមតិយោបល់ថ្មី។