សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ឧសភា 03, 2025 - 05:48 AM
ដើម្បីផ្គូផ្គង ម៉ូឌុល BLE ជាមួយឧបករណ៍របស់អ្នក សូមអនុវត្តតាមជំហានទាំងនេះ៖
1. Apply power of 3.3V to the module.
2. Send a serial command via UART to the module.
3. The module will enter advertisement mode, allowing it to be discovered by your device.
Please note that the specific serial command to send may vary depending on your device and its compatibility with the module. Refer to your device's user manual or contact the manufacturer for more information on the serial command required for pairing.
It is important to ensure that you have read and understood the safety instructions provided in the user guide before proceeding with the pairing process. Additionally, make sure to keep the module away from excessive heat sources and follow all safety precautions mentioned in the ការណែនាំអ្នកប្រើប្រាស់.
For any further assistance or troubleshooting, it is recommended to refer to the user guide or contact the manufacturer's customer support.
បន្ថែមមតិយោបល់ថ្មី។