សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ឧសភា 03, 2025 - 02:40 AM
To attach the router to the សន្ទស្សន៍ Dado Jigអនុវត្តតាមជំហានទាំងនេះ៖
1. Turn off and unplug your router before installing the bit or adjusting the cutter height.
2. If the Router Plate is already attached to the Jig Base, loosen and remove the two Easy-to-Grip 1" Knobs and the two Large Compression Washers from the 5/16"-18 x 11⁄2" T-Bolts to free the Router Plate.
3. Remove the baseplate that came with your router. Keep track of the screws.
4. Find the hole pattern in the Router Plate that matches the mounting holes on your router and align your router with the Plate. Make sure that the router’s handles will be in a comfortable position and that the router bit will be centered in the opening.
5. Use the appropriate set of included Router Mounting Screws or the screws you removed in Step 3 to attach the Router Plate to your router.
6. When attaching the Router Plate to the Jig Base, make sure that the offset keys on the underside of the Router Plate are toward the front of the Jig Base. A sticker has been placed on the base to help ensure the proper orientation.
7. Reinstall the Router Plate on the Jig Base with the two Easy-to-Grip 1" Knobs, the two Large Compression Washers, and the 5/16"-18 x 11⁄2" T-Bolts. Don’t tighten the knobs at this point.
Please refer to the assembly and calibration section of the សៀវភៅដៃ សម្រាប់ការណែនាំលម្អិត និងរូបភាពបន្ថែម។
បន្ថែមមតិយោបល់ថ្មី។