សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ឧសភា 02, 2025 - 03:19 AM
Image sticking is a phenomenon where a faint outline of a previously displayed image remains visible on the screen when the image is changed. To prevent image sticking on the ម៉ូឌុលក្រាហ្វិក LCD ស៊េរី Surenoo SLG14432Aអនុវត្តតាមការណែនាំទាំងនេះ៖
1. Avoid displaying a fixed image on the screen for more than 2 hours. If the monitor is operated in an elevated temperature environment, image sticking can occur in as little as 30 minutes.
2. Power down the module during prolonged periods of inactivity, such as when the device is not in use for several hours.
3. Use a screensaver with a black or medium gray background that is automatically set to come on if the module is inactive for more than 5-10 minutes.
4. Avoid placing the module in poorly ventilated areas or areas that generate excess heat around the module.
5. When designing the screen layout, use block patterns instead of distinct lines as borders for dividing the display into different areas.
6. If it is necessary to display a static image, use colors that are symmetric to the middle gray level at the boundary of two different colors, and slightly shift the border lines once in a while.
7. Utilize medium gray hues for areas that will have prolonged display times or remain static as other menu elements change.
To fix image sticking, run the module in an "all black" pattern for 4-6 hours, preferably in an elevated temperature environment of approximately 35º to 50ºC. Utilizing a dynamic screensaver with an all-black background during prolonged idle display periods can also help prevent image retention issues.
Please note that image sticking is considered a normal operation for Graphic Display technology, and it is not covered by the ស៊ូរ៉េណូ RMA warranty. Following these guidelines will help minimize the occurrence of image sticking on the Surenoo SLG14432A Series Graphic LCD Module.
បន្ថែមមតិយោបល់ថ្មី។