សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ឧសភា 02, 2025 - 12:35 AM
ដើម្បីរៀបចំ MicroCom 2400M wireless intercom systemអនុវត្តតាមជំហានទាំងនេះ៖
1. Connect a headset to the beltpack. The beltpack supports dual mini and single mini headsets. Dual mini connectors can be inserted in either direction, while single mini connectors can be inserted in either port of the headset connection.
2. បើកថាមពលនៅលើខ្សែក្រវាត់ដោយចុចប៊ូតុង POWER ឱ្យជាប់រយៈពេលបីវិនាទីរហូតដល់អេក្រង់បើក។
3. Select a Group by pressing and holding the MODE button for three seconds until the "GRP" symbol blinks on the LCD. Use the VOLUME +/- buttons to select a group number from 0-51. Press the MODE button to save your selection and proceed to ID setting. Note that beltpacks must have the same group number to communicate.
4. Select an ID by using the VOLUME +/- buttons when "ID" begins to blink on the LCD. Choose a unique ID number for each beltpack. Press and hold the MODE button to save your selection and exit the menu. Pack IDs range from 00-05, with "00" designated as the master pack for proper system function.
5. For listen-only packs, use the "05" ID. You can duplicate ID "05" on multiple beltpacks if setting up listen-only users.
6. For shared talk beltpacks, use the "Sh" ID. You can duplicate ID "Sh" on multiple beltpacks if setting up shared users. However, the "Sh" ID cannot be used at the same time as the last full-duplex ID "04".
For more detailed information and additional menu settings, please refer to the MicroCom 2400M user manual.
បន្ថែមមតិយោបល់ថ្មី។