សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 30 ខែមេសា ឆ្នាំ 2025 - ម៉ោង 05:55 ព្រឹក
ដើម្បីដំឡើង Sunco SM2x2-40W-0K-6PK 2x2 LED បន្ទះពិដានដែលអាចជ្រើសរើសបាន using the recessed mount method, please follow these steps:
1. Turn off the circuit breaker before starting the installation process.
2. Place the Ceiling Panel face down on a flat surface.
3. Unscrew the left driver and set aside the xxxx .
4. If you are using a dimmer, unscrew the right driver cover (optional).
5. Pop out the desired knockout from the panel (choice of 5).
6. If using a dimmer, pop out the 2nd knockout (optional).
7. Connect the supply wires to the Ceiling Panel wires using the included wire nuts:
- Black to Black (Live)
- White to White (Neutral)
- Green to Green (Ground)
8. If you want to use the dimming feature, connect the pink and purple wires on the Ceiling Panel to a compatible dimmer (not included).
9. Replace the driver covers and tighten the screws.
10. Set the preferred color temperature using the CCT (Correlated Color Temperature) switch located on the back of the Ceiling Panel.
11. Bend the four protective brackets located on the back of the Ceiling Panel up 90 degrees.
12. Turn the brackets 90 degrees so that the hook faces the outside edge of the Ceiling Panel.
13. Turn on the circuit breaker and test the light.
សូមមើលដ្យាក្រាមខ្សែភ្លើងដែលបានផ្តល់ និង ការណែនាំអំពីការដំឡើង for more details and illustrations.
Note: It is important to follow all safety precautions mentioned in the manual, such as turning off the circuit breaker before installation, using safety eyeglasses and gloves, and abiding by regional and local laws or regulations.
បន្ថែមមតិយោបល់ថ្មី។