សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 30 ខែមេសា ឆ្នាំ 2025 - ម៉ោង 02:51 ព្រឹក
ដើម្បីដំឡើង WASSERSTEIN XT2 3-in-1 Smart Plug-in Floodlightអនុវត្តតាមជំហានទាំងនេះ៖
1. Install the wall plate using the 4 screws and wall anchors provided.
2. Remove the protective tape from the EVA gasket and press the adhesive side firmly against the rear of the floodlight.
3. Mount the floodlight onto the wall plate and secure it with the long xxxx provided.
4. Insert the appropriate plug into the power adapter and turn it clockwise until it clicks. Note that 3 plug heads are included (US, UK, EU).
5. Connect the floodlight cable to the adapter cable and xxxx on the plastic cover.
6. ដោតអាដាប់ទ័រថាមពលទៅក្នុងរន្ធជញ្ជាំង។
7. Peel off the covers from the back of the cable clips and stick them onto the wall. Then run the power adapter cable through the clips.
For more detailed instructions and illustrations, please refer to the "Installing Your Floodlight" section in the WASSERSTEIN XT2 3-in-1 Smart Plug-in Floodlight user manual.
បន្ថែមមតិយោបល់ថ្មី។