សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 22 ខែមេសា ឆ្នាំ 2025 - ម៉ោង 11:12 ព្រឹក
ដើម្បីដំឡើងនិងដំឡើងកម្មវិធី កម្មវិធីបម្លែង USB AVT DMX512សូមអនុវត្តតាមការណែនាំខាងក្រោម៖
1. Connect the AVT DMX512 USB Converter to your computer's USB port using the included USB cable.
2. The device will be automatically recognized by your computer's operating system. If necessary, you can download the drivers from the following webគេហទំព័រ៖ https://www.ftdichip.com/. Make sure to install the virtual COM port driver.
3. After installing the drivers, an additional virtual COM port will appear in your system.
4. Connect your lighting installation devices to the AVT DMX512 USB Converter using a 3-pin XLR socket.
5. Ensure that the power supply for the AVT DMX512 USB Converter is provided directly from the USB port of your computer.
6. The AVT DMX512 USB Converter is compatible with USB 1.1 and 2.0.
7. It is recommended to use the converter with free programs that support DMX control.
8. The converter supports up to 512 devices and has a transmission range of up to 1200 meters.
Please note that any arbitrary changes to the components, structural modifications, or improper installation and connection of the device may cause damage and harm to users. It is important to follow the instructions provided in the manual to ensure proper usage and avoid any potential issues.
សម្រាប់ព័ត៌មានបន្ថែម ឬការដោះស្រាយបញ្ហា សូមចូលទៅកាន់គេហទំព័រ សៀវភៅណែនាំកម្មវិធីបម្លែង USB DMX512 AVT DMXXNUMX.
បន្ថែមមតិយោបល់ថ្មី។