សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 18 ខែមេសា ឆ្នាំ 2025 - ម៉ោង 11:24 ព្រឹក
ដើម្បីដំឡើង SALTO WRDx0E4x ឧបករណ៍អានជញ្ជាំងអ៊ឺរ៉ុបអនុវត្តតាមជំហានទាំងនេះ៖
1. Ensure that you have a gang electrical standard box available for installation.
2. Make sure you have the necessary hardware listed in the manual.
3. The wiring methods should comply with the National Electrical Code or the Canadian Electrical Code, Part 1.
4. The device has been tested and found to comply with UL294 performance level and ULC-S319 Class I.
5. The device is compatible with Mifare (DESFIRE, ULTRALIGHT C) and HID iCLASS RFID communication, as well as with the JustIN Mobile app through Bluetooth version 4.2.
6. The device requires a means of verification, such as a PIN or biometric feature, for access.
7. The device is not capable of command, control, programming, or system manipulation and should be used like a physical credential.
8. The device operates within specific temperature and humidity ranges. Refer to the manual for the exact values.
9. The device operates at RFID frequency of 13.56 MHz and Bluetooth Smart frequency of 2.4-2.483 GHz.
10. The power consumption of the reader and reader+keyboard should be taken into account when dimensioning the power supply.
11. The device should be connected to SALTO Control Units and it is recommended to use one cable per wall reader.
12. The manual provides cable types and maximum distances for installation.
13. The manual also includes installation examples for different models of control units.
14. The manual provides information on signaling, including light and buzzer indications for different events.
សូមយោងទៅ SALTO WRDx0E4x ការណែនាំអំពីការដំឡើងកម្មវិធីអានជញ្ជាំងអ៊ឺរ៉ុប for detailed installation instructions and further information.
បន្ថែមមតិយោបល់ថ្មី។