សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 16 ខែមេសា ឆ្នាំ 2025 - ម៉ោង 12:53 ព្រឹក
To adjust the output current of the MW XBG-160 ស៊េរី 160W កម្មវិធីបញ្ជារបៀបថាមពលថេរ, you can use the built-in potentiometer or the 3 in 1 dimming function.
1. Built-in Potentiometer: The driver has a potentiometer that allows you to adjust the output current. You can turn the potentiometer clockwise to increase the current or counterclockwise to decrease it. Please refer to the manual for the specific range of adjustment for your model.
2. 3 in 1 Dimming Function: If your driver has the AB-Type function, you can use the 3 in 1 dimming function to adjust the output current. This function allows you to apply one of three methodologies between DIM+ and DIM-: 0 ~ 10VDC, 10V PWM signal, or resistance. By adjusting the dimming input, you can control the output current level.
Please note that it is recommended to directly connect the LEDs to the driver and not use additional drivers when using the dimming function. Also, be aware of the minimum dimming level and the conditions under which the output current may drop to 0%. For more detailed instructions, please refer to the សៀវភៅដៃ provided at http://www.meanwell.com/manual.html.
បន្ថែមមតិយោបល់ថ្មី។