សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 16 ខែមេសា ឆ្នាំ 2025 - ម៉ោង 12:25 ព្រឹក
To match the remote control with the ឧបករណ៍បញ្ជា LEDអ្នកមានជម្រើសពីរ៖
Option 1: Use the controller's Match key
1. Press the Match key on the LED controller (the Match key is located on the controller).
2. Immediately press the on/off key on the remote control.
3. The LED light on the controller should blink, indicating that the match is successful.
ដើម្បីលុបឧបករណ៍បញ្ជាពីចម្ងាយដែលត្រូវគ្នាទាំងអស់៖
1. Press and hold the Match key on the LED controller for 5 seconds.
2. The LED light on the controller will blink 5 times, indicating that all matched remotes have been deleted.
ជម្រើសទី 2៖ ប្រើការចាប់ផ្ដើមថាមពលឡើងវិញ
1. Switch off the power to the LED controller.
2. Switch on the power to the LED controller.
3. ធ្វើជំហានទី ៤ និង ៥ ម្តងទៀត។
4. Immediately press the on/off key on the remote control three times.
5. The LED light on the controller should blink 3 times, indicating that the match is successful.
ដើម្បីលុបឧបករណ៍បញ្ជាពីចម្ងាយដែលត្រូវគ្នាទាំងអស់៖
1. Switch off the power to the LED controller.
2. Switch on the power to the LED controller.
3. ធ្វើជំហានទី ៤ និង ៥ ម្តងទៀត។
4. Immediately press the on/off key on the remote control five times.
5. The LED light on the controller will blink 5 times, indicating that all matched remotes have been deleted.
Please make sure to follow the instructions carefully and ensure that the remote control is within the controllable distance of the ឧបករណ៍បញ្ជា LED. If you are still experiencing issues, please refer to the troubleshooting section in the manual or contact the supplier for further assistance.
បន្ថែមមតិយោបល់ថ្មី។