User Manual Q&AAnswer
Apr 15, 2025 - 11:08 PM
To adjust the length of the GoFit GF-SR Speed Jump Rope, follow these steps:
1. Remove the end cap from one of the handles.
2. Push the rope through the end of the handle.
3. Separate the retaining clip and plastic clip collar.
4. Push the smaller clip down the rope to a predetermined length.
5. Cut the rope approximately 1/2" to the outside of the clip. It is better to cut too long if you are uncertain.
6. Pull the plastic collar back over the clip.
7. Re-insert the end of the rope into the handle.
8. Place the handle end cap back on.
Please refer to the manual for visual instructions and illustrations.
Add New Comment