សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 14 ខែមេសា ឆ្នាំ 2025 - ម៉ោង 10:56 ព្រឹក
មុនពេលដំឡើង ឧបករណ៍ការពារអេក្រង់ INVOIBLER 3 កញ្ចប់ដែលត្រូវគ្នា។, it is important to clean the screen properly to ensure a smooth and bubble-free installation. Here are the steps to clean the screen:
1. Use the cleaning kit included in the package. The cleaning kit usually consists of a microfiber cloth and a cleaning solution.
2. Start by turning off your device and disconnecting any power source.
3. Gently wipe the screen with the microfiber cloth to remove any dust, fingerprints, or smudges. Make sure to cover the entire screen surface.
4. If there are stubborn stains or dirt, you can lightly dampen the microfiber cloth with the cleaning solution provided in the kit. Avoid spraying the solution directly onto the screen.
5. Continue wiping the screen with the dampened cloth, applying gentle pressure. Ensure that the entire screen is thoroughly cleaned.
6. Once you have cleaned the screen, allow it to air dry for a few seconds to ensure there is no moisture left.
7. Now, you are ready to proceed with the installation of the ឧបករណ៍ការពារអេក្រង់ INVOIBLER 3 កញ្ចប់ដែលត្រូវគ្នា។.
Remember to follow the installation instructions provided in the manual, including removing the bottom protective layer and pressing the protector onto the screen using your finger.
បន្ថែមមតិយោបល់ថ្មី។