សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 14 ខែមេសា ឆ្នាំ 2025 - ម៉ោង 07:35 ព្រឹក
To adjust the output distribution and color temperature of the RAB CD34FA fixtureអនុវត្តតាមជំហានទាំងនេះ៖
1. Unscrew Plug A located on the fixture. This will allow you to adjust the output distribution and color temperature.
2. To adjust the output distribution, set Plug A down to select the desired option. Then, xxxx back Plug A.
3. To adjust the color temperature, set Plug A down to select the desired option. Then, xxxx back Plug A.
Please note that the default settings for the fixture are: output distribution selectable - Full and color temperature - 3000K. Adjusting Plug A allows you to customize these settings to your preference.
For further assistance or more detailed information, please refer to the RAB CD34FA 4 Inch Cylinder Surface-Pendant Mount Selectable CCT instructions ផ្តល់ជូនខាងលើ។
បន្ថែមមតិយោបល់ថ្មី។