សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 05 ខែមេសា ឆ្នាំ 2025 - ម៉ោង 12:43 យប់
ដើម្បីដំឡើង Signify SBP FluxPanel Selectable LEDអនុវត្តតាមជំហានទាំងនេះ៖
1. Remove the access plate on the luminaire and mount the J-box to the access plate using the provided hardware (J-box mounting bracket, 1/2" chase xxxx , and nut). Refer to the image in the manual for reference.
2. Secure the J-box to the access plate using the provided 8-18 xxxx .
3. Cut the low voltage leads in the middle of the loop (3-wire: WHT, RED, BLK).
4. Make sure the color tunable switch on the driver is set to 'NW' (neutral white).
5. To determine which set of leads goes to the LED driver and which goes to the LED boards, check the resistance between the red and white leads. The resistance between the red and white leads should be approximately zero ohms (closed circuit) for the LED driver and infinite ohms or very large resistance (open circuit) for the LED boards.
6. Label the LED board and driver leads to simplify the wiring of the auxiliary power supply.
7. Connect the two red leads back together using the wire nuts provided.
8. Refer to the instructions provided with the auxiliary power supply for wiring information. Use the cool white channel (white) of the luminaire as the LED+ and mount the test switch remotely using the provided wall plate.
9. To mount the auxiliary power supply to the luminaire, use the double-sided tape provided. Refer to the images in the manual to determine the specific location of the auxiliary power supply based on the size of the luminaire (2x4, 2x2, 1x4).
Please note that the installation and servicing of this product should be performed by a qualified electrician or service personnel. Ensure compliance with the National Electrical Code and all applicable local codes. Take caution to avoid contact with combustible materials and high ambient enclosures, as the lamp and luminaire operate at high temperatures and can cause fire and severe burns.
សម្រាប់ជំនួយបន្ថែម ឬការបំភ្លឺ អ្នកអាចទាក់ទងបាន។ សញ្ញា North America Corporation at 855-486-2216 or Signify Canada Ltd. at 800-668-9008.
បន្ថែមមតិយោបល់ថ្មី។