សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 26 ខែមីនា ឆ្នាំ 2025 - ម៉ោង 04:52 ព្រឹក
There are two ways to match the Skydance V5-M controller ជាមួយឧបករណ៍បញ្ជាពីចម្ងាយ។
1. Using the controller's Match key:
- Short press the Match key on the controller.
- Immediately press the On/Off key (for single zone remote) or Zone key (for multiple zone remote) on the remote.
- The LED indicator on the controller will fast flash a few times, indicating a successful match.
2. Using Power Restart:
- Switch off the power of the controller, then switch it back on. Repeat this step.
- Immediately short press the On/Off key (for single zone remote) or Zone key (for multiple zone remote) three times on the remote.
- The light on the controller will blink three times, indicating a successful match.
Note: To delete all matches, press and hold the Match key on the controller for 5 seconds. The LED indicator will fast flash a few times, indicating that all matched remotes have been deleted.
សូមយោងទៅ Skydance V5-M 5 Channel RGB+CCT LED RF Controller User Guide សម្រាប់ការណែនាំលម្អិត និងរូបភាពបន្ថែម។
បន្ថែមមតិយោបល់ថ្មី។