សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 25 ខែមីនា ឆ្នាំ 2025 - ម៉ោង 09:00 ព្រឹក
To reboot the charger and fill in the information about the internet connection using the Webកម្មវិធីដំឡើង astoសូមអនុវត្តតាមជំហានទាំងនេះ៖
1. Download and open the Webasto Setup App from the provided QR code.
2. Take the manual and locate the code page. Scan the big QR code on that page using the Webasto Setup App.
3. Follow the instructions provided by the Webasto Setup App to reboot the charger. Make sure to select and fill in the information about the internet connection. This step is crucial for the charger to connect to the Monta app.
4. If you have selected a Wi-Fi connection, you will need to enter the password and name of the Wi-Fi access point.
5. After completing the setup process, instruct the wallbox owner to download the Monta app and use the charger. The serial number of the wallbox will be required to connect the wallbox and Monta app together.
For more detailed information and guidance, please refer to the Webasto Setup App user guide and the wallbox manual provided.
បន្ថែមមតិយោបល់ថ្មី។