សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 21 ខែមីនា ឆ្នាំ 2025 - ម៉ោង 12:00 ព្រឹក
ដើម្បីដំឡើង KOHLER K-1165-S1 72 Inch x 42 Inch Drop-in Bath, follow the instructions provided in the installation manual. Here is a step-by-step guide:
1. Prepare the installation area: Ensure that the installation area is clean, level, and free from any debris. Make sure the floor can support the weight of the bath.
2. Position the bath: Carefully position the bath in the desired location. Ensure that the drain hole aligns with the drainpipe.
3. Connect the drain: Install the K-11677 Bath Drain or any compatible drain according to the manufacturer's instructions. Make sure to use the included template (Drop-in, 1042557-7) for proper positioning.
4. Secure the bath: Once the drain is connected, secure the bath in place using the K-577 Under-Mount Installation Kit. Follow the instructions provided with the kit for proper installation.
5. Connect the overflow: Install the overflow according to the manufacturer's instructions. Ensure a proper seal to prevent any leaks.
6. Test the installation: Fill the bath with water and check for any leaks or issues. Adjust the drain and overflow connections if necessary.
សូមចំណាំថានេះជាការបញ្ចប់ទូទៅview of the installation process. It is essential to refer to the specific instructions provided in the KOHLER K-1165-S1 72 Inch x 42 Inch Drop-in Bath instruction manual សម្រាប់ជំហានដំឡើងលម្អិត និងត្រឹមត្រូវ។
បន្ថែមមតិយោបល់ថ្មី។