សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 18 ខែមីនា ឆ្នាំ 2025 - ម៉ោង 03:41 ព្រឹក
ដើម្បីដំឡើង BubblyNet G4 បូក G7 Touchscreenសូមអនុវត្តតាមជំហានទាំងនេះ៖
1. Use an appropriate cutting tool to make a cutout in the wall according to the dimensions provided in the cutout table. The cutout can be in landscape or portrait mode. Make sure to pull out the USB-C and Ethernet cables through the cutout.
2. Connect the USB-C and Ethernet cables to the touchscreen. The USB-C cable is necessary for power and operation, while the Ethernet cable is optional but recommended.
3. ទាញប្រភពទឹកមកវិញ ដើម្បីរៀបចំការដំឡើង។
4. បញ្ចូលអេក្រង់ថាច់ស្គ្រីនចូលទៅក្នុងជញ្ជាំង ដោយប្រាកដថាខ្សែទាំងអស់ស្ថិតនៅខាងក្នុងជញ្ជាំង។
5. Flip on the breaker to the screen. The touchscreen will automatically start the setup routine.
សូមបញ្ជាក់ថាការដំឡើងអេ BubblyNet G4 បូក G7 Touchscreen should be done by a qualified electrician, in accordance with the National Electrical Code, local, and federal specifications. Disconnect power at the electrical panel before servicing.
For further information and specifications, please refer to the provided manual.
បន្ថែមមតិយោបល់ថ្មី។