សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 18 ខែមីនា ឆ្នាំ 2025 - ម៉ោង 01:51 ព្រឹក
ដើម្បីដំឡើង LEDMYPLACE BD001 អំពូល LED សូឡាអនុវត្តតាមជំហានទាំងនេះ៖
1. Check if the surface is flat or determine how to ensure the light is perfectly vertical.
2. Mark out the center points of the holes on the surface according to the sizes shown to suit the base plate.
3. Drill or core holes to accommodate an M6 threaded rod or other securing device.
4. Install the rod and ensure that sufficient thread protrudes from the plate.
5. Place the base plate over the bolts and use a spirit level to ensure the pole is set level.
6. Remove the white rubber cork and push the button inside the pole to activate the system.
Once these steps are completed, your solar light is now installed and ready for operation.
សម្រាប់ការណែនាំលម្អិត និងរូបភាពបន្ថែម សូមមើល គេហទំព័រ សៀវភៅណែនាំអ្នកប្រើប្រាស់ LEDMYPLACE BD001 Solar LED Bollard Lights.
បន្ថែមមតិយោបល់ថ្មី។